Install-anchor-hooks – Oldcastle BuildingEnvelope Signature Series Unit Wall User Manual
Page 8
Advertising
July 2013
07-Install-Anchor-Hooks
1-866-Oldcastle (653-2278) www.oldcastlebe.com
INSTALL ANCHOR HOOKS
1. INSTALL ANCHOR HOOKS
Back off FS-341 stopping screw at the bottom of the anchor bracket, slide in the anchor hook.
Tighten up FS-341, the screw is to prevent anchor hook from sliding out of the anchor bracket during
frame installation.
Slide the anchor hook
into anchor bracket
Tighten up FS-341
stopping screw
after anchor hook
installation
SIGNATURE SERIES UNIT WALL INSTALLATION MANUAL
Advertising