Holes. see figure 4-15, Assembly (figure 4-14) – Rice Lake Combination System - Precision Loads On-Board Weighing Systems User Manual
Page 24
Advertising
Body Bracket
Bearing Plate
Load Cell
Washer
Bolt
Chassis Bracket
Coil Spring
Washer
Anti-rotation Plate
Spring Bolt
Note
20
Precision Loads On-Board Weighing Installation & Service Manual
Use a serviceable thread lockers on all load cell bolts
Figure 4-14. Mounting Springs, PL9000-14.4 Load Cell Installation
Fixed Mounts
Underbody load cell kits typically consists of both spring and fixed-mounted load cells. Four point kits as well as
six-point kits normally have the two load cells fixed-mounted as shown below for the model PL9000-14.4
underbody installation. Always ensure access to all load cell mounting bolts for both maintenance and inspection.
Body Bracket
Bearing Plate
Load Cell
Washer
Bolt
Washer
Chassis Bracket
Bolt
Figure 4-15. Fixed Mounting
Advertising
This manual is related to the following products: