Rice Lake Scout Pro Series Portable, Ohaus - Service Manual - Manual (Page 37)

B-3
A PPENDIX B FACTORY CALIBRATIONS
13. Repeatedly press and release the PRINT Unit button until the display shows END.
14. Press and release the ON/ZERO Off button. The balance will return to the weighing mode.
15. Press and hold the ON/ZERO Off button until the display shows OFF.
16. Remove power from the balance
17. Remove either the short on U9 or the short on the RS232 option.
18. Replace the cover.
B.2 FACTORY CALIBRATION (CONT.)