Rice Lake TradeRoute HL Series - M2000 Scale - Manual (Page 18)

14
5.1.1.3 Canceling a calibration parameter.
If you would like to cancel a calibration function you can use the CLEAR key
as an ESCAPE key. This key will get you out of most calibration operations.
5.1.1.4 Toggle between weight and AD counts.
A unique feature of the M2000 is the ability to toggle between weight and the
AD converters internal counts. This can be an excellent diagnostic tool for
the experience scale technician. Pressing the ON/OFF key will show the
internal AD counts. The blinking ‘C’ will now change to a blinking ‘A’ to
indicate analog AD counts are being displayed. Press the ON/OFF button
again to switch back to weight mode.
5.1.1.5 Exiting Calibration Mode.
To exit calibration mode press 99 followed by the print select key. All
calibration parameters will be saved and the indicator will restart in weighing
mode. Note: Channels 2 and 3 are disabled by default. Remember to enable
them before exiting calibration mode by using parameter 98.