SINGER 9970 - Manual (Page 22)

22
SELECTING UTILITY
STITCH PATTERN
Utility stitches are indicated in the pattern chart
located inside of the top cover.
When you turn on the machine, straight stitch will
be selected automatically.
Select utility stitch pattern as follows.
A. DIRECT STITCH PATTERN
You can select basic straight stitch pattern directly
by pressing the Direct Stitch Selection Button.
B. SELECTING OTHER UTILITY STITCH
PATTERNS
1. Press the utility button. Diagram B1
First 5 patterns will be indicated on the LCD.
2. Press the right scroll button, next 5 patterns will
appear. Diagram B2
By pressing the left or right scroll button, you
can scroll up or down in increments of 5
patterns. (You can also scroll down by pressing
the utility button.)
3. To select a pattern, press the function button
directly under the desired pattern. Diagram B3
4. When pattern is selected, LCD will indicate the
information of selected pattern. Diagram B4
(Stitch information mode)
a. Stitch Number and pattern
b. Suitable presser foot
c. Function of function button
F2 Mirror/reverse
F3 Elongation
F4 Stitch Width, Length
F5 Thread Tension (See previous page)
If the function mark is not indicated, its funtion can
not be used.
C. MIRROR/REVERSE STITCH
You can set the mirror stitch, or reverse stitch or
mirror/reverse stitch.
Pressing the function button (F2) directly under the
mirror/reverse icon, stitch will flip from left to right
or from front to back.
The icon on the LCD indicates the selected stitch
as follows:
a. Regular stitch (normal stitch)
b. Mirror stitch (reverse left and right)
c. Reverse stitch (reverse front and back)
d. Mirror and Reverse stitch
If the mark is not indicated, the pattern cannot
change to mirror or reverse stitch.
When you pressed clear “C” button, machine will
return to regular stitch (also elongation will return
to regular length.)
a b c d