Free motion darning – SINGER 1120 User Manual
* The darning foot is an optional accessory not included with
Set the pattern selector dial to "
" or "
Remove the presser foot clamp (3).
Attach the darning foot to the presser foot holder. The lever (A)
should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C) (4).
First sew around the edge of the hole (to secure the threads)
(5). First row: Always work from left to right. Turn work by 1/4
A darning ring is recommended for easier sewing and better
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Install the darning plate (2).
Free motion darning
Note: Stitch length
cannot be controlled
with dial as feed
dogs are lowered.
Stitch width dial
models A & B
Stitch length dial
(models A, B & C)