SINGER 14T968DC Professional 5 Workbook Part 2 User Manual

Page 27

Advertising
background image

6. Place the thread through threading guide and .




7. Continue threading guides , , and .







8. Thread the looper eye (A) from front to back. Pull about 4 inches of thread
through the looper. Position the thread into the V cutout (B) on the threader.

Firmly hold the thread tail with your left hand and pull threader lever (C) up

into place (D). Gently pull 5-6” of thread to the back of the machine.









Thread Right Overedge with regular overlock thread.

1. Raise the Presser Foot to release the tension disks. Thread the right

needle as illustrated 1-9.

2. Pass thread from back to the front

through the thread guide .

Four-Thread Safety Stitch page 10

“V” cutout

Threader lever

Advertising
This manual is related to the following products: