SINGER 14T968DC Professional 5 Workbook Part 2 User Manual

Page 63

Advertising
background image


Thread Right Overedge needle with regualar overlock thread.

1. Raise the Presser Foot to release the tension disks. Thread the right

needle as illustrated 1-9.

2. Pass thread from back to the front

through the thread guide .










3. Thread the top cover thread guide by pulling the thread towards the left until

it slips under the guide. Then pull the thread along the right side of the

button as illustrated.











4. Continue to thread points 4-8. Slip the thread into the rear slot of the

thread guide . Go over the take up lever . Continue by slipping the

thread into the right slot of the thread guides and .

Five-Thread Safety Stitch Narrow page 13

Advertising
This manual is related to the following products: