SINGER 1525 User Manual
Page 67
60
3
A
B
C
5
4
GB
Free motion darning, stippling, embroidery
and monogram
* The darning foot is an optional accessory not included with your
machine. (1)
Install the darning plate. (2)
For darning, first sew around the edge of the hole (to secure the
threads). (5)
Free motion darning is accomplished without the sewing machine
internal feed system. Movement of the fabric is controlled by the
operator. It is necessary to coordinate sewing speed and
movement of fabric.
For embroidery and monograms draw or trace your design onto
your fabric using a marking pencil.
Sew a straight or zigzag stitch following your design line. Using the
optional darning foot will help guide you as you sew.
Set the machine as illustrated.
Remove the presser foot clamp. (3)
Attach the darning foot to the presser foot holder. The lever (A)
should be behind the needle clamp screw (B). Press the darning
foot on firmly from behind with your index finger and tighten the
screw (C). (4)
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning hoop is recommended for easier sewing and better
results.
For stippling, stitch in any direction without repositioning the quilt. It
is used to create texture and fill the background.
Note:
1
2
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
M