SINGER 7025 - Manual (Page 34)

5 Stitch Sewing Machines
Lace insertion
Lace is inserted after fabric is cut, but before it is sewn
together.
Recommended Settings
Stitch Selection "M" Stitch
Needle Position:
Stitch Width:
Stitch Length: 1/2-2
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
* Cut lace to desired size.
* Position lace on right side of fabric and pin in place.
* Place the work under the presser foot so that the
stitches fall over the lace edges. as shown.
* After both sides of lace are sewn, turn fabric over to
the back side and cut the fabric on both sides close to
the stitching lines and remove.
34