Operation, Charging a hot or cold battery pack, Starting the machine – Snow Joe iON16CS 40-Volt Cordless 16-Inch Chain Saw w/ Brushless Motor User Manual

Page 12

Advertising
background image

12

5. When the bottom light turns green, the battery is fully

charged (Fig. 11).

NOTE: If the top light remains green while the bottom light

alternately flashes red and green, this indicates a temperature

abnormality (i.e. that the battery pack is either too hot or too

cold). If there is only a red blinking light, this indicates that

something is wrong with the battery. Contact Snow Joe

®

+

Sun Joe

®

customer service at 1-866-SNOWJOE

(1-866-766-9563).

6. A fully discharged pack with an internal temperature in the

normal range will fully charge in 2.5 to 3 hours (between

32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs

may take longer to charge completely.

7. If the charging light indicator alternately blinks red and

green or the light indicator does not come on at all,

check that the battery pack is fully seated into the bay.

Remove the pack and reinsert. If the problem persists,

contact an authorized Snow Joe

®

+ Sun Joe

®

dealer or

call the Snow Joe

®

+ Sun Joe

®

customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

8. When charging is complete, remove the battery from the

charger by pulling the push lock button and sliding the

battery backward to unlock it from the charger (Fig. 12).

11. Timely recharging of the battery will help prolong the

battery's life. You must recharge the battery pack when

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully

discharged as this will cause irreversible damage to the battery.

Charging a Hot or Cold Battery Pack

A red and green flashing indicator light on the charger indicates

that the battery pack temperature is outside the charging

range. Once the pack is within the acceptable range, normal

charging will take place and the red light will be continuous.

Hot or cold battery packs may take longer to charge.

Operation

Starting the Machine

1. Insert the battery in its housing (Fig. 13).

Fig. 11

green

green

Fully charged

green

red

Charging

Green

Flashing red/green

Temperature abnormal

Flashing red only

Something is wrong

Fig. 12

Push lock button

Battery Pack

Temperature

Lithium-Ion Charging Status

Too hot

Flashing

Not charging

Normal range

Continuous

Normal charging

Too cold

Flashing

Not charging

Red Charger

Indicator Light

Charging

Status

Fig. 13

Battery

Advertising