Snow Joe iON16CS 40-Volt Cordless 16-Inch Chain Saw w/ Brushless Motor - Manual (Page 19)

19
Chain Sprocket
Regularly check the condition of the sprocket and replace it
when wear exceeds 0.5 mm (Fig. 25).
Do not mount a new chain with a worn sprocket or vice-versa.
Storage
After every work session, clean the machine thoroughly to
remove all dust and debris and slide the bar sheath over the
cutting bar. Repair or replace any faulty parts on the unit.
Store the machine in a dry, locked place out of the reach
of children.
Support
If your Sun Joe ® iON16CS cordless chain saw requires
service or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into
the space provided below.
< 0.5 mm
Fig. 25
Record the following numbers from the housing or handle of your
new product:
i O N 1 6 C S
Model #:
Serial #: