Snow Joe iON16CS 40-Volt Cordless 16-Inch Chain Saw w/ Brushless Motor - Manual (Page 7)

Know Your Cordless Chain Saw
Read the owner’s manual and safety rules carefully before operating your cordless chain saw. Compare the illustration
below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this
manual for future reference.
7
Technical Data
Battery Voltage* 40 V D.C.
Battery Capacity 4.0 Ah
Charging Time 2.5 – 3 hours (for full charge)
Battery Run Time 25 – 40 min
No Load Speed 4,400 ± 10% rpm
Motor Brushless
Bar Chain Length 16 in. (405 mm)
Cutting Thickness (Max) 14.6 in. (371 mm)
Oil Tank Capacity 2.4 fl oz (70 ml)
Weight (chain saw alone) 9.5 lbs (4.3 kg)
Weight (chain saw with battery installed) 12.8 lbs (5.8 kg)
1. Cutting bar sheath
2. Spiked bumper
3. Front hand guard
4. Front hand grip
5. Battery charge level indicator
6. Push button for battery indicator
7. EcoSharp
® lithium-ion battery (iBAT40)
8. Push lock button
9. Rear hand grip
10. Chain/sprocket end cover
11. Ring nut
12. Chain tension adjustment knob
13. 16" (405 mm) Oregon guide bar
14. 16" (405 mm) Oregon chain
15. Oil tank cap
16. Oil level indicator window
17. Safety lock button
18. Trigger switch
19. EcoSharp
® battery charger (iCHRG40)
*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.
1
19
3
4
5
6
7
8
9
2
14
13
11
10
12
15
16
17
18