Thetford 34117 - Waste Ball - Manual (Page 2)

7. Activate Pedal to assure Waste Ball
opens and closes completely.
8. Install Seal Retainer.
9. Install new Waste Ball Seal, flat side
down, onto Retainer.
10. Add (only) supplied grease to under-
side of Bowl at outfall opening where it
meets seal.
11. Replace Bowl on Base. Turn clockwise
and align the two screw holes in Base
and Bowl.
12. Install washers (plastic washer on
china first then metal washer) and
Screws. Tighten until snug, but do not
overtighten.
Reinstall Toilet
1. Install new Closet Flange Seal, lip side
down, on toilet.
2. Uncover holding tank opening and
remove towel(s).
3. Place toilet on floor, aligning mounting
holes with Closet Bolts.
4. Tighten Closet Flange Nuts until toilet
does not rock. Do not overtighten.
5. Replace Nuts and Bolt Covers (if present).
6. Connect RV water supply line to toilet.
7. Turn on water supply.
8. Flush test toilet, checking for leaks at
all connections.