Tjernlund HS115-3,4,5 (Discontinued) 8505010 Rev 08/00 - Manual (Page 12)

9
MODEL HS-5 POWER VENTER OUTPUT WIRING TO MAC-3
(POWER VENTER MOTOR GREATER THAN 9 AMPS)
MAC-3 PART # 950-0460 OUTPUT WIRING WITH A POWER VENTER
When wiring the MAC-3 with a Tjernlund HS-3, HS-4 or HS-5 Power Venter only the Fan Proving Switch and motor leads are utilized
for wiring. The HS-3,4,5 Series utilize our part # 950-1040 relays which can be plugged into the MAC-3 for 24V control systems. The
model HS-3 and HS-4 include two part # 950-1040 relays. The model HS-5 includes one part # 950-1040 relay.
MODELS HS-3 & HS-4 POWER VENTER OUTPUT WIRING TO MAC-3
(POWER VENTER MOTOR LESS THAN 9 AMPS)
NOTE:
For appliance interlock with MAC-3 and
24V controlled appliances, see diagram on
top of page 8.
For appliance interlock with MAC-3 and
115V controlled appliances, see diagram on
bottom of page 8.
NOTE:
For appliance interlock with MAC-3
and 24V controlled appliances, see
diagram on top of page 8.
For appliance interlock with MAC-3
and 115V controlled appliances,
see diagram on bottom of page 8.
115/115V RELAY
TJERNLUND PART # 950-0483