Tjernlund Auto-Draft FSAD & VSAD Series Inducers 8504090 Rev 11/00 - Manual

Copyright © 2000, Tjernlund Products, Inc. All rights reserved. P/N 8504090
REV. 11/00
RECOGNIZE THIS SYMBOL AS AN INDICATION OF IMPORTANT SAFETY INFORMATION!
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND
OPERATION OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION, ADJUST-
MENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRI-
CAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, PERSONAL
INJURY OR PROPERTY DAMAGE.
!
DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP IN
A SAFE PLACE ON JOB SITE FOR FUTURE REFERENCE.
MODELS
FSAD-8
FSAD-10
FSAD-12
VSAD-8
VSAD-10
VSAD-12
AUTO-DRAFT ® VENT SYSTEMS
FOR NATURAL GAS, LP OR OIL-FIRED
HEATING APPLIANCES
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com
Auto-Draft® Venters are tested and Listed to UL
Standard 378 for Draft Equipment
Auto-Draft® Venters are tested and Listed to
CAN3-B255-M81 for Mechanical Flue-Gas Exhausters /
CAN-B140-M87 Sec. 19 for requirements for through
the wall venting systems used with oil-fired appliances