Vintage Cellars VRM Series Split System User Manual
Vrm series
OPTIONS
• Twin and triple evaporator systems for larger applications
• Eco-friendly water-cooled condensing units available
• Stainless steel cabinets for high-corrosive environments
FEATURES
• High-performance staggered coils with copper tubing
mechanically expanded into aluminum fins
• Insulated rust-proof aluminum housing
• Thermally protected permanently lubricated motor
• Automatic expansion valve (standard) ensures constant coil
temperature to promote “Humidity Balance”
• Pump-down solenoid valve (standard) protects compressor in
the event of leaks
• Pre-installed valves eliminate additional wiring to thermostat
• Pressure tested by the manufacturer to ensure quality
• Factory wired for simple field installation
• ETL certified
VRM SERIES
Vertical Rack Mount / Air or Water Cooled
Single Evaporator Unit with Digital Controller
US Cellar Systems / 3070 Golden Ave, Long Beach, CA 90806 / www.uscellarsystems.com
(562) 513-3017 phone and fax / [email protected]
SYSTEM INFORMATION
The Vertical Rack Mount (VRM)
Systems are designed to provide
refrigerated air to medium-high
temperature spaces.
VRM evaporators mount vertically
and have multiple access panels to
direct or re-direct the supply and
return vents. These can be placed
in a soffit, between ceiling joists,
or on a wall. By far this is our most
versatile system and our biggest
seller.
VRM evaporators are available in
standard capacities from 2,600 to
6,600 BTU per hour and are used
with R134a refrigerant.
Vertical Rack Mount
VRM2600
VRM3600
VRM4600
VRM4600 HV
VRM6600
Max Cubic Feet
300
650
1,000
1,000
2,000
BTUH
2600
3600
4600
4600
6600
Fan Coil
VRM25
VRM35
VRM35
VRM50
VRM65
Length
11.378”
11.378”
11.378”
11.378”
11.378”
Width
11.188”
11.188”
11.188”
11.188”
11.188”
Height
41.500”
45.500”
45.500”
47.500”
51.500”
Weight
48 lbs
50 lbs
50 lbs
59 lbs
63 lbs
Volts
115 V
115 V
115 V
115 V
115 V
Amps
0.77 A
0.77 A
0.77 A
0.77 A
1.85 A
Condensing Unit
CU46
CU66
CU86
CU100
CU120
Length
16.30”
17.90”
17.50”
24.00”
24.30”
Width
13.10”
14.40”
14.30”
16.90”
17.90”
Height
11.80”
11.80”
12.00”
15.90”
13.40”
Weight
56 lbs
60 lbs
79 lbs
130 lbs
95 lbs
Volts
115 V
115 V
115 V
208/230-1ph
208/230-1ph
Amps MFS
12.5 A
15.5 A
20.7 A
14.8 A
9.9 A
System Line Set
Suction
1/2”
1/2”
5/8”
5/8”
7/8”
Liquid
1/4”
1/4”
3/8”
3/8”
3/8”
BEST SELLERS
Due to continuing engineering improvements, specifications are subject to change without notice.
March 29, 2012 10:03 PM