Vintage Cellars SLK Series Evaporator User Manual

Page 3

Advertising
background image

The indoor unit must be installed so that there is
no short circuit of the cool discharge air with the
hot return air. Please follow the installation
clearance shown in the figure. Do not place the
indoor unit where there could be direct sunlight
shinning on the unit. Also, this location must be
suitable f or piping and drainage and be away
from the door or window.

INDOOR UNIT

INSTALLATION OF THE INDOOR UNIT

MOUNTING INSTALLATION PLATE

Ensure that the wall is strong enough to
support the weight of the unit. Use the
plumb line for horizontal mounting, and
fix it with 4 suitable screws.
If the lines are through the wall, drill a
65mm hole at the proper location. It should
be slightly lower on the outside of the wall

INDOOR SIDE

OUTDOOR SIDE

Figure E

Figure D

Figure C

Advertising