Vintage Cellars Monterey 12-bottle - Manual (Page 3)

3
Unpacking
While unpacking your unit, please check to make sure that all parts are included and undamaged. Please
call WineKeeper at 855.511.5113 if there are any problems. YOU MUST REPORT damage immediately
and missing parts within 7 days of receiving your unit.
These parts are included with your unit:
• Appropriate number of faucets for your unit
• Regulator (for use with refillable nitrogen or argon cylinder)
• Cleaning kit
• Instructions
Setting Up Your Unit
Your WineKeeper wine dispensing unit must be installed on a flat, level surface with vented space of at
least 3" behind, 1" on the sides, and 12" above the unit for proper ventilation. Once your unit is properly
located, attach the faucets. Taking care to align the threads properly, place the faucet on the thru-wall and
tighten the wing nut.
You may now plug the units’ power cord
into 110 volt grounded electrical outlets.
Be sure to plug in all electrical cords:
• 4-bottle units = 1 plug
• 8-bottle units = 2 plugs
• 12-bottle units = 3 plugs
An 8 foot gas supply line is included with
your unit. The supply line includes a
quick connect fitting that connects to the
regulator supplied with your unit.
USING A REGULATOR OTHER
THAN THE ONE SUPPLIED WILL
VOID THE WARRANTY. Your
nitrogen/argon cylinder can be placed
anywhere convenient—vertical or
horizontal.
DO NOT TAMPER WITH OR
REMOVE THE QUICK-
DISCONNECT TO COUPLE YOUR GAS SUPPLY
LINE AND REGULATOR, THIS WILL ALSO VOID THE WARRANTY.