Vinten Radamec Fusion APS - Manual (Page 18)

16
Maintenance
Routine Maintenance
The APS scanner requires minimal routine maintenance, apart from
checking the connections and overall operation periodically.
Routine Checks
During use, check the following:
• Check cables for signs of wear or damage. Replace as necessary
• Check that all cables are connected properly
Cleaning
APS Scanner
During normal use the only cleaning required should be a regular wipe
over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports.
Laser Scanner Window
Static charges cause dust particles to be attracted to the window of the
laser scanner.
To clean the window, proceed as follows:
WARNING! Risk of electric shock. Always check cables
for signs of damage. Damaged cables can cause personal
injury and/or damage the equipment.
WARNING! Risk of electric shock. Always disconnect and
isolate the product from the power supply before cleaning.
CAUTION! Potential performance reduction due to
contamination of the window in the laser scanner. The
window must be regularly cleaned as described.
WARNING! Switch off the APS scanner before cleaning the
laser read head window.
1
Use a clean and soft brush to remove dust particles
from the window.
2
Carefully wipe the window using a clean and damp
lens cloth.