Troubleshooting – Vinten Radamec Fusion APS User Manual
Page 21
Advertising
19
Troubleshooting
.
Display
Fault/Check
Comments
Pedestal positional information not displayed. The APS
scanner requires the landmark mapping procedure to be
carried out.
See Landmark Map Scanning on page 11.
The APS scanner has not booted correctly. Try power
cycling the scanner and the pedestal.
If the problem persists, contact Vinten Radamec.
The APS scanner has not located the memory card, or
the memory card is incorrectly formatted.
Contact Vinten Radamec.
Advertising