Vinten Radamec ICE Tool - Manual (Page 13)

11
General Device Configuration
Renaming Devices
Every ICE device has a unique host ID number. However, ICE Tool can
be used to assign a user friendly name to a device to make
identification easier in a multi-device system.
1. In the Hcm configuration window click Set Name.
2. Enter a new name in the field when prompted (example shown is
Head 1).
3. Click Ok. The new host name will take effect and is displayed at
the top of the host ID structure.
Rebooting Devices
Single or multiple devices can be rebooted using ICE Tool. This
function could be used after software upgrades, or if a device or system
has become unresponsive.
1. Select the required device(s) for reboot as shown below:
2. The selected device(s) will reboot but remain added to ICE Tool.
About ICE Tool
Information can be obtained about the current ICE Tool installation by
selecting Help > About from the top menu bar. The current version of
the software is displayed, together with the current device components
supported.
Note
The host can also be renamed by right-clicking on the host
ID number and selecting Set Name.
Right-Click on: Select: Action
The host ID of a
single device. Reboot. Only the selected device will
reboot.
The product
folder. Reboot All. All devices of the same product
type will be rebooted.
The System
icon. Reboot All
Hosts. All devices connected to the
current session of ICE Tool will
be rebooted.