Vinten Radamec ICE Tool - Manual (Page 20)

18
Head Configuration
e) To enable the head to start transmitting VR data, select the
Enable VR Tracking check box.
3. Click Apply to store and enable any configuration changes to take
effect.
Copying Configurations
The configuration settings on a head can be transferred to another
head of the same type. This saves time when setting up a system with
identical heads. It is also possible to transfer the configuration of just
one component of a head, such as the VR or Ethernet settings.
Copying Head Configuration
1.
Right-click on the host ID of the head with the required
configuration and select Copy Configuration.
2. Right-click on the host ID of the recipient head for the copied
configuration and select Paste Configuration.
3. When the confirmation window appears, click Yes to paste the
configuration into the head. Click No to abort the procedure.
Copying Component Configuration
1.
Right-click on the required individual component of a head and
select Copy Configuration. Configuration settings can be copied
and pasted from the Hcm, Head and Vri components.
2. Right-click on the correct component of the recipient head and
select Paste from the menu. When the confirmation window
appears, click Yes to confirm and paste the configuration file into
the recipient head, or No to abort.