Vinten Radamec Legislative Control System - Manual (Page 14)

Vinten Radamec LCS Operator’s Guide
12
CCU The CCU panel enables you to adjust camera settings
and fine-tune your picture quality. Use it to adjust Gain,
Pedestal, Iris and Shutter settings to suit the shooting
conditions.
If supported, Auto White, CAM/BAR and Iris mode can be
enabled by selecting the appropriate button.
The controls (and the scales) made available in the CCU
panel depend on the make and model of camera installed
in your system. For example, Iris Level settings could
range from 0 to 100 for one camera type, and 0 to 1028
for an another camera type.
Microphones The Microphones control is only configured in systems
which have a separate data stream of active microphones
available. This is typically in legislatures where a Speaker
controls who is permitted to speak by activating a
microphone.
The control populates with targets as microphones
become active and ready for broadcast, allowing you to
quickly cue a sequence of shots.
If available, the Microphones control provides an
alternative to the Keypad control for quickly selecting a
target.
Active Seat Plan The Active Seat Plan provides an instant visual indication
of broadcast status, such as Mic Live, and whether a
Target (i.e. seat) is occupied.
It also lets you to select a target by clicking on its
graphical representation (as an alternative to keying in the
target number using the Keypad control).
Targets can be represented as simple graphical icons as
shown here or with your own customised symbols.
The position of cameras can also be shown, if requested
at engineering configuration time.