Vinten Radamec Legislative Control System - Manual (Page 23)

Installation and Connection
21 Legislative Control System
When you are satisfied that the camera shot is set up
correctly and that the quality score for that shot is
appropriate, you can save the shot information permanently
to the LCS database by pressing the Save button. Once
saved, the yellow frame disappears from the shot button.
Pressing Cancel discards any changes and returns the shot
button to its previous state.
To reduce the number of times Save needs to be pressed, it
is possible to assign a number of shots to the matrix for your
target and then save them all with a single press of the Save
button.
Warning: Pressing the Cancel button will lose all the shots that
have been placed in the matrix but not yet saved!
The Target Store tracks the most recent target selections
and presents you with the relevant matrix of saved shots.
The actual camera shots that have been selected for use by
the LCS are indicated by a light blue triangle in the top left
corner of the matrix shot button.
Should you wish to manually override the shot that the LCS
has selected automatically, you can press the corresponding
shot button in the matrix. The LCS will use the new shot and
move the light blue triangle accordingly.
At any time, shot information in the Target Store can be
edited. To edit a shot, select it by pressing the appropriate
shot button in the matrix. Adjust the camera view, zoom,
focus and black point using the MJP, and assess the shot
value.
The shot button is given a yellow surround to indicate that
the shot has been trimmed (changed). When you are happy
with your changes, press Save (or Cancel to discard any
changes).
Several shots can be trimmed and saved with single Save if
desired, but remember that pressing Cancel loses all
unsaved trimmed shots.
The Target Store Panel has a Summary section that
contains a button for each of the control buses that are
active in your Target Summary control. Pressing any of
them displays the stored shot information assigned to that
target so that you can make adjustments if necessary.
When you have completed and saved a shot matrix for
every target in your venue, you can start to use the LCS for
broadcasting. The next section explains how the LCS is
used on a daily basis.