Vinten Radamec Legislative Control System - Manual (Page 18)

Vinten Radamec LCS Operator’s Guide
16
Adjusting your camera settings
The CCU panel interfaces with every camera on your system,
collecting its technical data so that you can adjust settings such
as colour gain, shutter mode, iris and white levels.
Use the CCU to calibrate your system each day before you start
shooting, or if lighting conditions change significantly.
Select a camera using the Cameras control. Its number shows in the top left corner of the
CCU control.
The calibration and adjustment settings should be familiar from using the on-camera
adjustment settings.