Vinten Radamec Legislative Control System - Manual (Page 20)

Vinten Radamec LCS Operator’s Guide
18
Select an Active Seat Plan
Your LCS will have an active seat plan of your venue(s)
already installed.
Press Schematic A to load it and use your mouse and
wheel to scale and position it within the ‘active’ area of the
control panel. When you are happy with its size and position
press Lock to secure it, keeping your configuration ready for
next time you log in.
If more than one plan is stored, it will be available by
pressing Schematic B, etc.
Every target in the active seat plan provides an instant visual
indication of its broadcast status, for example: Default,
Tallied, Live and Empty.
The example below shows Seat 1 as Mic Live.
Every seat (or target) represented is linked to a database of
stored camera shots, so selecting a target will prompt the
LCS to load those shots to the Target Summary control
ready for possible use.
The Chroma Seat Plan and Active Seat Plan controls are
independent from user login so that you can access more
than one venue’s target information at any time.
The next section describes how to create a database of
shots.
Select a Chroma Seat Plan
To load a new Chroma Seat Plan, either drag the
corresponding file from your image folder (or any other file
location you have chosen) and drop it over the lower section
of the chroma seat plan control (where the selection buttons
appear). Alternatively, you can type the corresponding image
file name into the Display Name text entry point and press
enter on your keyboard. The target plan appears in the
‘active’ area of the control with an illuminated button below
showing that it is selected and active.
You can rename the image by typing into the display name
text entry point. Any changes appear in the plan selection
button, as shown in the ‘Senate Seat Plan’ example shown
above.
You can have multiple target plans loaded simultaneously,
but only one is active at a time. To change their order, key in
a number in the Index entry point.
Press Save to keep the current control configuration, ready
for use next time you log in.
To remove a target plan, select it by pressing its button and
then press Remove this image.
Press less... to shrink the control so that just the target plan
and lower selection buttons are visible. Press more... to
expand the control and display the load, remove and save
functions.