Vinten Radamec Virtual Reality interface (VRi) - Manual (Page 15)

13
Installation
System Connections
Lens Encoder Connection
Use the appropriate compatible cable to connect Canon or Fujinon
lenses with quadrature encoder output. The lens port can also be used
to connect externally mounted (bolt-on) lens encoder devices.
Ethernet Connection
The ethernet (NET2) port is used to communicate with a Quattro SE
pedestal. The ethernet port can also be used for diagnostic and
servicing purposes.
Note: If the Quattro SE is fitted with a slip ring, refer to the Slip Ring
Setup Guide (publication p/n V4094-4980) for more details on
connections.
CAUTION! All cables must be secured and dressed using
the cable clamp to minimise the risk of damage.