Vinten Radamec Virtual Reality interface (VRi) - Manual (Page 17)

15
Installation
Studio VR Connection
Connect the VR port to the studio VR graphics system. This port
provides formatted tracking data from the head, lens and pedestal.
VR Data Port Pin Designations
The VR Data port transmits the VR data to the studio VR graphics
system. The RS422 pin designations are as follows:
Powering Up
Before powering up the VRi box, ensure that all external cable
connections are secured correctly.
To power up, operate the on/off rocker switch. If powering the VRi box
from the AC power supply all three power LEDs will illuminate. If
powering from the DC power supply, only the 5V and 12V LEDs will
illuminate.
If the power LEDs do not illuminate, refer to the Troubleshooting section
of this manual.
Studio VR
graphics
system
1 2 3 4 5
6 7 8 9
VR Connector
Pin Number
Function on VR
Connector
Function on VR Studio
System
2 RXD-/RXA TXD-/TXA
6 RXD+/RXB TXD+/TXB
3 TXD-/TXA RXD-/RXA
7 TXD+/TXB RXD+/RXB
Note: Pin number allocations at the VR studio system end are
product-specific.