Vinten Radamec Virtual Reality interface (VRi) - Manual (Page 6)

4
About this Manual
The Virtual Reality interface (VRi) box has been designed to integrate
with the Vinten Vector ‘i’ series heads and the Quattro SE pedestal.
This manual covers the installation of the VRi box and its connections
with compatible products and studio equipment.
When installation is complete, the VR system must be configured
before the VRi box is used for VR tracking.
The VRi box can be configured using the VR software application
running on a Windows-based PC or on a Vinten Radamec PDA. The
configuration software is provided on a USB stick for installation on a
PC or is pre-installed on a Vinten Radamec PDA.
For more information on configuring the VRi box, refer to the
configuration guides installed on the USB memory stick supplied with
this product, or contact Vinten Radamec.