Welch Allyn TM286 Auto Tymp - User Manual - Manual (Page 63)

Directions for Use Computer Interface 59
Computer Interface
Interface configuration
The configuration of the TM286 computer interface must be set to match the interface
configuration of the computer. The TM286 defaults to 115 kBaud, no parity, 8 data bits, 2
stop bits and no communications flow control. The default settings for the baud rate,
parity, number of data bits and flow control may be modified using the Data Transfer
Program Mode explained earlier in this chapter.
Cable connections
The computer interface provides a serial interface consisting of a USB connector.