Cleaning, Part numbers 73210 and 73211, Including 07800-u lamp) – Welch Allyn 6V Power Supply, Rectal Light Handle - User Manual User Manual
Page 11: Part number 73500, Including 03100-u lamp)
1-8
8.
Connect the power supply to the appropriate wall outlet and reconnect the
Rectal Light Handle cord to the power supply cord and verify that the lamp is
illuminated.
9.
If the lamp fails to illuminate, refer to the Troubleshooting section on page 1-
17 or contact your local Service Center (page 1-21) for further assistance.
Cleaning
Assembly and Disassembly Instructions for 73210 and 73211
1.
Disconnect the light handle from the power supply cord and the
device.
2.
Unscrew the outer sleeve of the handle by turning it
counterclockwise.
Part Numbers 73210 and 73211
(including 07800-U lamp)
Part Number 73500
(including 03100-U lamp)
WARNING Allow the lamp to cool for at least 5 minutes before
handling.
NOTE Leave the lamp installed while reprocessing 73210, 73211 and
73500.