Welch Allyn 6V Power Supply, Rectal Light Handle - User Manual - Manual (Page 20)

1-17
Trouble Shooting Guide
Problem Possible Cause Solution
Lamp does not
light.
Rectal Light Handle is not
plugged into the power
supply. Verify that the Rectal Light Handle
is properly plugged into power
supply cord.
Power Supply is not
plugged in. Verify the power supply is properly
plugged into the outlet.
Faulty Lamp Replace with a new lamp.
Loose Lamp
Verify that the lamp is secured into
the Rectal Light Handle.
Wrong Lamp
Verify that the lamp is a REF
07800 Welch Allyn lamp.
Damaged Lamp
Inspect the lamp and the o-ring for
damage. Replace with REF 07800
lamp if damage is found.
Rectal Light
Handle does not
stay plugged
into the
transformer
cord.
Rectal Light Handle/
transformer interconnect
plug is damaged.
Inspect interconnect plug for
damage. Replace either or both
REF 73211 or REF 73305, 73322,
73324, 73326.
Light output
seems low.
Faulty Lamp Replace with a new lamp.
Dirty lamp lens
Inspect lamp lens for debris and
clean.
This guide is intended to provide assistance towards determining the fault
condition of this product. Please contact the authorized Welch Allyn Service
Center listed within the product owners manual for additional assistance.