Welch Allyn CP 150 12-lead resting electrocardiograph v.2.00.XX - User Manual User Manual
Page 27
•
Height. Touch the OK button.
•
Weight. Touch the OK button.
•
Comments. Touch the OK button.
5. Touch the (Next) button.
6. Attach the leads to the patient.
Note
If desired, touch the
(torso) button to enlarge the
lead-placement screen. Any flashing dots on the ECG
preview screen indicate unattached or poorly attached leads.
Item
Button
1
Leads button
2
ECG preview button
3
Gain button (size)
4
Speed button
5
Filters button
7. If an Artifact message appears, minimize the artifact, as described under
Troubleshooting. You might need to ensure that the patient is comfortably warm,
reprepare the patient’s skin, use fresh electrodes, or minimize patient motion.
8. (Optional) Adjust the waveforms, using the buttons to cycle through the following
options:
•
leads displayed
•
ECG preview format
•
gain (size)
•
speed
•
filters
9. Touch the Print button to perform the Auto ECG test.
Directions for use
ECG tests 23