Welch Allyn CP 150 12-lead resting electrocardiograph v.2.00.XX - User Manual - Manual (Page 29)

3. Attach the leads to the patient.
4. Touch the Print button to perform the Auto ECG test.
Performing an Auto ECG test using the Worklist tab
CAUTION Patient data is not saved until the ECG test is completed.
Note The ECG configuration settings can be changed in the Settings tab. The
following settings may appear differently if the default settings have been
modified.
1. Touch the (Auto ECG) button. The Summary tab appears.
2. Touch the Worklist tab.
The worklist is downloaded from the EMR.
3. Select the patient from the Worklist.
• Touch the Order ID, Patient ID, Patient name, or Birth date in the Patient ID/
Patient name field.
• Touch the Select button.
• Touch the (Next) button to review or edit patient information.
• Touch the (Next) button again.
4. Attach the leads to the patient.
5. Touch the Print button to perform the Auto ECG test.
6. After the test prints, select the desired option: Reprint, Save, Retest, or Rhythm.
Performing a Rhythm ECG test after an Auto ECG test
1. Touch the (Auto ECG) button.
2. Enter the patient information.
• Touch the (Next) button to review or edit patient information.
• Touch the (Next) button again.
3. Attach the leads to the patient.
4. Touch the Print button to perform the Auto ECG test.
5. After the test prints, touch the Rhythm button.
If you are prompted to save the Auto ECG test, select Local, USB mass storage
device, Workstation, or Remote file location. Touch Save.
6. Touch Start to begin the Rhythm ECG test.
Touch Stop once the desired length of real-time rhythm strips have printed.
Directions for use ECG tests 25