Welch Allyn XENON 300 LIGHT SOURCE - User Manual - Manual (Page 11)

2
7
Components
System Description
The Welch Allyn 49801 light source is intended to be used as a 300 watt light source to
supply illumination for surgical fiber optic headlights.
DO
OPERATION.
TO
THE
MODULE. LAMP
DO IN FOR
WITH PART NUMBER 04980, 14 VDC 300 W
LAMP REPLACEMENT, REPLACE PLACE. NOT OPERATE THE LIGHTSOURCE WITHOUT LAMP MODULE
OR LAMP MODULE. READ INSTRUCTIONS BEFORE REPLACING
SAME TYPE AND RATING OF LAMP OR LAMP PREVENT OVERHEATING, REPLACE ONLY WITH
ALLOW LAMP TO COOL 5 MINUTES.
NOT REMOVE LAMP IMMEDIATELY AFTER
SERIAL
/ 200-240V 50 60Hz, 6.5A UL2601 NO. 601.1 C22.2 CAN/CSA IEC601-2-18
C
IEC601-1
/ ~ 100 - 120
N344
T8.0L 250V
74227
NUMBER
REF 49801
R
L IS T E D R L IS T E D R
R
S T O Z R
W O L F A C M I
OLY MP US
1 3 2
4
6
5
9
7
8
DO
OPERATION.
TO
THE
MODULE. LAMP
DO
IN
FOR
WITH PART NUMBER 04980, 14 VDC 300 W
LAMP REPLACEMENT, REPLACE PLACE.
NOT OPERATE THE LIGHTSOURCE WITHOUT LAMP MODULE
OR LAMP MODULE.
READ INSTRUCTIONS BEFORE REPLACING SAME TYPE AND RATING OF LAMP OR LAMP PREVENT OVERHEATING, REPLACE ONLY WITH
ALLOW LAMP TO COOL 5 MINUTES. NOT REMOVE LAMP IMMEDIATELY AFTER
SERIAL
/ 200-240V 50 60Hz, 6.5A UL2601 NO. 601.1 C22.2 CAN/CSA IEC601-2-18
C
IEC601-1
/ ~ 100 - 120
N344
T8.0L 250V
74227
NUMBER
REF 49801
R
L IS T E D R L IS T E D R
R
S T O Z R
W O L F
A C
M I
OLY MP US
1 3 2
4
6
5
9
7
8
DO
OPERATION.
TO
THE
MODULE. LAMP
DO
IN
FOR
WITH PART NUMBER 04980, 14 VDC 300 W
LAMP REPLACEMENT, REPLACE PLACE.
NOT OPERATE THE LIGHTSOURCE WITHOUT LAMP MODULE
OR LAMP MODULE.
READ INSTRUCTIONS BEFORE REPLACING SAME TYPE AND RATING OF LAMP OR LAMP PREVENT OVERHEATING, REPLACE ONLY WITH
ALLOW LAMP TO COOL 5 MINUTES. NOT REMOVE LAMP IMMEDIATELY AFTER
SERIAL
/ 200-240V 50 60Hz, 6.5A UL2601 NO. 601.1 C22.2 CAN/CSA IEC601-2-18
C
IEC601-1
/ ~ 100 - 120
N344
T8.0L 250V
74227
NUMBER
REF 49801
R
L IS T E D R L IS T E D R
R
S T O Z R
W O L F
A C
M I
OLY MP US
1 3 2
4
6
5
9
7
8
Power Switch - “l”
indicates “ON” position
Fiber Optic Bundle Turret -
accepts fiber optic bundles for
ACMI, Wolf, Olympus and Storz.
Cooling Fans - provides
cooling to light source
Lamp Module Access Door -
access for lamp replacement.
Handle - means to carry light source.
Active light port Fuse Holders - contains
the main fuses.
Power Module - accepts
AC power cord.
Brightness Control - increases or
decreases light output intensity level.