Welch Allyn XENON 300 LIGHT SOURCE - User Manual - Manual (Page 15)

Directions for Use Chapter 3 Maintenance 11
Fuse Replacement
1. Turn unit off prior to checking the fuses.
2. Unplug the light source.
3. Use a flat blade screwdriver to remove fuse covers and check for blown fuse.
4. Replace the blown fuses with the same size and rating.
5. Replace fuse covers.
Ordering Information
Part Information
Replacement Parts
DO
OPERATION.
TO
THE
MODULE.
LAMP
DO
IN
FOR
WITH PART NUMBER 04980, 14 VDC 300 W
LAMP REPLACEMENT, REPLACE PLACE.
NOT OPERATE THE LIGHTSOURCE WITHOUT LAMP MODULE
OR LAMP MODULE.
READ INSTRUCTIONS BEFORE REPLACING
SAME TYPE AND RATING OF LAMP OR LAMP
PREVENT OVERHEATING, REPLACE ONLY WITH
ALLOW LAMP TO COOL 5 MINUTES.
NOT REMOVE LAMP IMMEDIATELY AFTER
49800 Welch Allyn Xenon 300 Light Source
100-120/200-240 VAC, 50-60 Hz, 5.5A
50-60 Hz
USA Plug type
04980-U Replacement Lamp Module
76400 USA Power Cord