Welch Allyn Propaq Encore Update - Quick Reference Guide - Manual (Page 41)

Propaq Encore Version 1.20 39
English
The audible indications have not changed from those stated in the Propaq Encore
Reference Guide. A steady, high pitched alarm tone sounds whenever a limit is
violated on most patient channels. The tone for SpO
2
alarm is lower in frequency
than other alarms. The Apnea alarm tone is one second on, one second off. The
equipment alert tone is one second on, four seconds off. The alarm tone
indications are summarized in Table 2.
Table 1—Propaq Encore Alarm Indications
Patient and Alarm Limit Status
Red
ALARM
Light
Yellow
ALARM(S)
OFF Light
Tone
Patient in alarm condition, and all
alarm limits are on FLASH OFF ON
Patient in alarm condition, and at
least one alarm limit is off FLASH ON ON
Patient alarms suspended
(whether in alarm condition or not) ON ON or OFF OFF
Patient not in alarm condition, and
at least one alarm limit is off OFF ON OFF
Equipment alert, patient not in
alarm condition OFF FLASH ON for 1 second,
OFF for 4 seconds
Intl Update Doc.fm5 Page 39 Monday, April 29, 1996 3:30 PM