Welch Allyn Holter Software PCH100 and PCH200 - Installation Guide - Manual (Page 9)

9
2. Install Holter Application
Overview:
• Insert CD
• Install .Net Framework
• Install Application
• Install Database
• Finish
2.1 Insert the CD into the CD ROM Drive.
Note: If installation program does not start up Select Start > Run. Then enter “D:\Setup.exe” or browse the CD drive
and select the “Setup.exe” program.
Note:
If re-installing system that was previously installed at a modified location; it is required that the registry for
WAHolter be removed.
2.2
The following screen is displayed.
2.3
Click OK and the following screen appears: