Welch Allyn CP200 Cardiopulmonary Connectivity Software - Installation Guide - Manual (Page 25)

Installation guide Configuration 21
To configure the plug-in for automatic ECG importing
This procedure configures the CardioPerfect program to import ECG tests into the
CardioPerfect database automatically when new SCP files appear in the specified folder.
1. Find the TestFileImporter entry in CPSAPI.config.
Example:
<TestFileImporter name=”SCP-ECG Test Importer” enabled=”1”
type=”CPWS.Plugins.TestFileImporter.SCPECGTestFileImporter,CPWS.Plugins” sourcefolder=”specify import folder
here” />
2. Modify the enabled and sourcefolder attributes as desired.
3. Restart the CPSAPI service.
a. Go to Control Panel > Administrative Tools > Services.
b. Right-click CardioPerfect Services.
c. Select Restart.
Attribute Description Possible Values
enabled Specifies whether CPSAPI should load and execute the plug-in. 0 (Off), 1 (On)
sourcefolder Specifies the import folder for incoming SCP-ECG files.
Caution: The destination and source (export and import) folder names
must be unique. If these folder names are identical, the system will
not operate properly. Any valid Windows path