Tcp/udp ports used – Welch Allyn PartnerConnect Software - Installation Guide User Manual
Page 12
Server name
IP address
Required
ports
Optional
ports
Location
gas-de1.axeda.com
62.209.44.17
443, 17002
80, 17001
Frankfurt
gas-hk3.axeda.com
120.136.45.13
443, 17002
80, 17001
Hong Kong
gas-aus.axeda.com
122.202.65.179
443, 17002
80, 17001
Sydney
gas-sj4.axeda.com
204.42.142.84
443, 17002
80, 17001
San Jose
gas-bo4.axeda.com
209.202.167.141
443, 17002
80, 17001
Waltham
gas-bo5.axeda.com
209.202.167.142
443, 17002
80, 17001
Waltham
gas-bo6.axeda.com
209.202.186.30
443, 17002
80, 17001
Waltham
Note
If you need IP addresses, contact your IT network person to resolve the DNS names
to an IP address, based on your current and local settings.
For additional diagnostic information, go to the following URL:
After logging in, this screen appears:
TCP/UDP ports used
The following table lists the port assignments used by the Welch Allyn PartnerConnect solution.
After installation, you can use this information to configure the firewalls, virus software, and router
access lists for your facility.
8 Troubleshooting
PartnerConnect® software