Zippy RPU-6400F-RV2S - Manual (Page 2)

1.1 INTRODUCTION
Thank you for the purchase of the Redundant Switching Power System RPX product
( X may stand for A / D / H / I / M / S / U ), each model has the same main structure
and functions. The difference is on the shape and dimension. For each detail drawing,
please refer to the section 1.3.
Your RPX is a redundant switching power supply set, it consists of
(1) complete metal frame (optional)
(2) two PS/2 form factor power supplies with HOT-PLUGGABLE capability
(3) redundant power control board (RPC)
(4) power supply unit holder,
It delivers full safety redundant ( hot-swappable ) function and provides the
hot-pluggable feature. In other words, it can offer a more reliable and safer,
easy install / maintain operation in Power Supply to your computer system.
Its major function is the two power supplies can mutually backup when one of
the power supplies is defective. At the same time, it provides the warning subsystem,
such as LED display, buzzer alarm, power defective signal etc.
When both the power supplies are at normal condition, it balances the load share and
increases the power supply system's reliability.
To really discover the power and ease in using this product, we recommend that you
read through this manual carefully.
1.2 PACKING
Your RPX box package should consist of the followings:
(A) 1 x RPX
(B) 1 x Screws pack
(C) 1 x User's manual
1.3 DRAWING
MODEL NUMBER IDENTIFICATION:
RP X - X XXX X [ X X X X ]
RP
---- REDUNDANT POWER SUPPLY
FIRST X ---- A / D / H / I / M / S / U ETC.
SECOND X ---- 4 STAND FOR 4 DC OUTPUTS (5 / 12 / -5 / -12V)
5 STAND FOR 5 DC OUTPUTS (5 / 12 / -5 / -12V / 3.3V)
THIRD XXX ---- OUTPUT WATTS (250 / 300 / 400)
FOURTH X ---- F STAND FOR WITH EMI LINE FILTER
BLANK STAND FOR WITHOUT EMI FILTER
6TH X ---- OPTIONAL FUNCTION ( A: AVS; P: PFC )
7TH X ---- R STAND FOR ATX SYSTEM
BLANK STAND FOR NON-ATX SYSTEM
8TH X ---- VERSION
1