Crestron electronic AM/FM/TV Tuner - Manual (Page 18)

Integrated AM/FM/TV Tuner Crestron ST-TUNE
14
••
Integrated AM/FM/TV Tuner: ST-TUNE Operations Guide - DOC. 5833A
10. Refer to the diagram below. Select the NET ID of the ST-TUNE and
then click OK.
“Select Network ID” Dialog Box
11. As shown below, browse to the firmware directory, select the
downloaded firmware (UPG) file and click Open. The transfer will
complete automatically.
Select Firmware (UPG) File
NOTE: When the external power pack is disconnected from the ST-TUNE,
operating power will automatically switch to Cresnet power supplied via the NET
connector(s). To remove power from the unit, make sure both external power pack
and NET connector(s) are removed.
12. Remove operating power from the ST-TUNE, wait several seconds and
reconnect power.
13. Close the Viewport, exit SIMPL Windows or VT Pro-e, and disconnect
the programming cable from the PC and the control system.
Programming with SIMPL Windows
SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programming language that is completely integrated and compatible with all
Crestron system hardware. The objects that are used in SIMPL are called symbols.
SIMPL Windows offers drag and drop functionality in a familiar Windows®
environment.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system.