Crestron electronic AM/FM/TV Tuner - Manual (Page 36)

Integrated AM/FM/TV Tuner Crestron ST-TUNE
32
••
Integrated AM/FM/TV Tuner: ST-TUNE Operations Guide - DOC. 5833A
14. Remove operating power from the ST-TUNE, wait several seconds and
reconnect power.
15. Allow at least 30 seconds after power has been reconnected then select
Diagnostics | Report Network Devices in the Viewport (alternatively,
depress F4). Observe Viewport return display show “ST-TUNE
NEEDS FIRMWARE [1.1]”
16. Refer to diagram below. From the Viewport menu, select Setup |
Communications settings (alternatively, depress Alt+D) to open the
Port Settings dialog box.
Accessing the Port Settings Dialog Box
17. Refer to the diagram below. Select XModem as the “Mode for
Network Transfers”.
Port Settings Dialog Box for Firmware Upload