Connecting an external monitor, Vga cable (supplied) vga cable (not supplied), Monitor out audio – Canon LV-7245 User Manual
Page 24: Monitor out)
16
2. Installation and Connections
Connecting an External Monitor
MONITOR OUT
AUDIO
AC IN
VIDEO IN
L
AUDIO IN
R
S-VIDEO IN
ANALOG IN-1
ANALOG IN-2
AUDIO OUT
L
AUDIO IN
R
MONO
MONO
SERVICE PORT
AUDIO IN
(MONITOR OUT)
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
image you're projecting.
To do so:
1. Turn off the power to your projector, monitor and computer.
2. Use an VGA cable to connect your monitor to the MONITOR OUT (Mini D-Sub 15 pin) connector on your projector.
3. Connect the supplied power cord. See page
4. Turn on the projector, monitor and the computer.
NOTE: Daisy chain connection is not possible.
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
VGA cable (supplied)
VGA cable (not supplied)