3) adjusting the picture size and position, Adjust the tilt foot, ᕣ adjusting the picture size and position – Canon LV-7245 User Manual
Page 31: Le tilt f, Projecting an image (basic operation)
23
3. Projecting an Image (Basic Operation)
Place your projector on a flat level surface and ensure that the projector is
square to the screen.
Lift the front edge of the projector to center the image vertically.
*
If the projected image does not appear square to the screen then use the
Keystone feature for proper adjustment. See page
ᕣ Adjusting the Picture Size and Position
AC
IN
ZO
OM
FOC
US
AC I
N
ZOO
M
FOC
US
Adjust the Tilt Foot
1. Lift the front edge of the projector.
2. Push up the Adjustable Tilt Foot Levers on the right and left sides
of the projector to extend the adjustable tilt feet (maximum height).
3. Push down the Adjustable Tilt Foot Levers.
4. Lower the front of the projector to the desired height and release
the Adjustable Tilt Foot Lever to lock the Adjustable tilt foot. There
is approximately 10 degrees of up and down adjustment for the
front of the projector.
CAUTION
Do not use the tilt-foot for purposes other than originally intended. Misuses
such as gripping the tilt-foot or hanging on the wall can cause damage to the
projector.
PO
W
ER
VIDEO
S-V
ID
EO
COM
PUT
ER-
1
COM
PUT
ER-
2
WA
RN
ING
LAM
P R
EPL
AC
E
AU
TO
PC
VO
L
-
VO
L
+
ZOOM
FO
CU
S
2
1
2
PO
W
ER
VID
EO
S-V
ID
EO
COM
PUTER-1
COM
PUTER-2
WA
RNING
LAMP
REPLACE
AU
TO
PC
VO
L
-
VO
L
+
ZO
OM
FO
CU
S
4
3
4
Adjustable Tilt Foot
Move the projector left to center the image horizontally on the screen.
Adjustable Tilt
Foot Lever
Adjustable Tilt
Foot Lever