Getting started – COBY electronic DVD-53 User Manual

Page 14

Advertising
background image

Page 1

Coby Electronics Corporation

www.cobyusa.com

Page 1

Page 1

Coby Electronics Corporation

www.cobyusa.com

Page 1

Remote Control Battery Installation

Refer to the diagram. Remove the

battery compartment cover located

on the rear of the remote control. In-

sert batteries, making sure to match

their polarities (+/-) to the markings

on the inside of the compartment.

Replace the cover.

To use the remote, point it at the

remote sensor of the player. Oper-

ate the remote within 15 feet of the

sensor and at an angle of +/- 60 de-

grees.

Batteries in the remote will last for

approximately 1 year. Replace the

batteries if the remote control does

not work. Do not mix old with new

batteries, or different types of batteries.

Remove the batteries from the remote if it will not be used for a long period

of time.

The batteries used in the remote control may present a fire or chemi-

cal burn if mistreated. Do not recharge, disassemble, incinerate, or

heat the battery (~212°F).

Keep batteries away from children.

GETTING STARTED

The remote control transmits a directional infrared beam. Be sure to aim

the remote control directly at the infrared remote sensor during opera-

tion. The sensor may not be able to receive signals properly if the sensor

is covered, if there is a large object between the remote control and the

sensor, or if it is exposed to direct sunlight or a strong artificial light (e.g.,

fluorescent or strobe lights). If possible, change the position of the light

source or reposition the unit to avoid direct lighting.

Advertising