COBY electronic DVD-53 - Manual (Page 18)

Page 1 Coby Electronics Corporation www.cobyusa.com Page 1 Page 1 Coby Electronics Corporation www.cobyusa.com Page 1
CONNECTIONS
Audio Connections
Use one of the following connections
only to avoid signal interference:
2-Channel Stereo Audio Out
5.1-Channel Surround Audio Out (requires a surround sound amplifier)
Coaxial Digital Audio Out (requires a digital decoding amplifier)
Optical Digital Audio Out (requires a digital decoding amplifier)
2-Channel Stereo
The DVD player is equipped with 2-channel RCA Stereo Audio outputs located
on the rear panel (L, R). Connect the player’s audio outputs to a stereo TV (or
optionally, a stereo amplifier).
Component, Composite, or
S-Video Connection
2-Channel Audio
To L/R Audio Input of Stereo TV
To L/R Audio Input of Stereo Amplifier (optional)
TV with AV Input
2-Channel
Stereo Amplifier
If a stereo amplifier is used, it should be set to the output mode that
corresponds to the DVD player. Refer to the amplifier’s user guide for
help.
1.
2.
3.
4.