Setting up the apr for windows 2000 – Dell Inspiron 5000 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
15 Click Yes to restart the computer.
16 After the computer restarts, Windows modifies settings, creates a Dock
1 configuration, and then displays a Setup is complete message.
17 Click OK.
18 If the Updated display settings message appears, click OK.
19 If necessary, consult your network administrator for instructions on
configuring the network adapter settings.
Setting Up the APR for Windows 2000
O
N O T I C E : Do not install the drivers from the CD that is shipped with the APR.
The network adapter will not work if they are installed.
1 If the computer is on, shut down the operating system and turn off the
2 Disconnect all external devices from the APR.
3 Insert the computer into the APR.
4 Attach the network cable and the power adapter to the APR.
5 Turn on the computer.
6 Log on as Administrator.
7 Make sure that Intel 8255x-based PCI Ethernet Adapter (10/100)
appears in the Found New Hardware window
Windows 2000 automatically installs the network adapter drivers.
S e t t i n g U p I 2 3