Dell Inspiron 5000 - Manual (Page 60)

Button Function
Status lights The left light turns on when the eomputer is attaehed to the
port replieator and is turned on.
The eenter light turns on when you press the undoek button,
or when the eomputer is plaeed in standby mode.
The right light turns on when the port replieator is eonneeted
to an eleetrieal outlet.
^I h INT: Memory modules
purchased from Dell are
covered under your computer
Adding Memory
You ean inerease your eomputer memory by installing memory modules on
the system board. See page 68 for information on the type of memory
supported by your eomputer.
Your eomputer has two memory module soekets. All Dell memory modules
(exeept the 192-MB eapaeity module) ean be installed in either soeket.
V NOTICE: The 192-MB memory modules are socket-specific. Before installing
a 192-MB memory module, refer to the markings on the memory module to
determine which socket accepts the module.
CAUTION: Before working inside your computer, read the “Safety
Instructions" at the front of this guide (see page 5).
O NOTICE: Do not install or remove a memory module when the computer is
turned on, in standby mode, or in hibernate mode.
1 Save and elose any open files, exit any open applieation programs, and
shut down the eomputer.
2 Remove all installed batteries and any external deviees, and diseonneet
the AC adapter eable from the eomputer.
3 Ground yourself by touehing a metal eonneetor on the baek of the
eomputer.
6 ^ I A d d i n g - a r t s